Welcome to the third and final part of my Linux VDA on CentOS 6.6 Blog series… (Nearly there!!!) If you have just stumbled across this post and would like to go back and review what has come before just click on these links: Part 1 – Installing and preparing the Linux OS and Part 2 – Installing and configuring the Linux VDA. Once again, I hope you enjoy the final part in the series and, as always, please sound off in the comments if you have any questions or feedback.
@XDtipster – Linux VDA setup on CentOS 6.6 Pt.2
Now that we have our Linux OS installed and prepared as per part 1 of this guide. It’s time to move onto part 2 and install and configure the Linux VDA for registration with a Site Controller… Once again, I hope you enjoy the read and please sound off in the comments if you have any questions or feedback :-)
@XDtipster – Linux VDA setup on CentOS 6.6 Pt.1
With the Linux VDA set to drop very shortly as part of the XenApp & XenDesktop 7.6 FP2 release. It seems like a good time to share the high level, yet detailed, set-up process I followed when successfully carrying out internal testing. Taken from various sources including the tech preview RHEL install guide, my colleague Lee Bushen’s detailed SLED based lab set-up guide and a tonne of Google searches and read-through’s, I hope this collection of posts can save people some time and be used and referenced as one of the definitive Linux VDA setup guides for CentOS 6.6.
Configure StoreFront Multi-Site configurations
StoreFront Multi-Site configurations are still fairly unknown. I guess this has something to do with XenDesktop 7 still being relatively new (I know, it’s actually a StoreFront 2.0 feature) and with this I mean, the addition of the XenApp functionality. Since zones are no longer part of XenDesktop 7, or the Flex Management Architecture (they’ve disappeared together with the Local Host cache) you’ll have to, in most cases, create separate Sites to achieve similar results. Especially if Sites are geographically separated. When using StoreFront Multi-Site configurations we can still add in load balance and failover capabilities, even when using geographically ‘Dispersed’ Sites, just like we are (or were) used to with zones. No NetScaler required, although it’s probably a good idea to implement one anyway.