Category: Citrix

The Citrix Long Term Service Release vs. the Current Release. What’s (really) new?

Average time to read: 8 minutes

Not that long ago (during Summit 2016 to be exact) Citrix introduced two new XenApp / XenDesktop servicing options, the LTRS, which stands for Long Term Service Release and the CR a.k.a. Current Release. And while this is sort of a big deal, it does tend to confuse people on what to expect when it comes to Citrix support. This post is meant to clarify a couple of misconceptions that have been slowly formed during the last two months or so.

Continue reading The Citrix Long Term Service Release vs. the Current Release. What’s (really) new?

Book announcement: Inside Citrix – the Flex Management Architecture!

Average time to read: 7 minutes

As you might have noticed, lately it has been rather quite on basvankaam.com. But not to worry, I’m still here. While the number of blog posts from my end have been somewhat on the low side, I have kept myself busy *understatement* to say the least. Besides preparing three presentations (still a lot of work to do on those as well), which are all due in the next 2 months (Citrix Synergy included) I have been working on a big private project, a book!

Continue reading Book announcement: Inside Citrix – the Flex Management Architecture!

Citrix NetScaler… The basics continued, part seven. Split Tunneling!

Average time to read: 5 minutes

It has been a while but here is some more NetScaler madness for you, on Spilt Tunnelling this time. Hopefully I’m not boring you guys just yet (because there are a few more coming). Split tunnelling is a feature specific to SSL VPN’s and controls how the client (plugin) decides what traffic must (or may) be sent through the VPN tunnel and what traffic may be sent out directly on its local network, usually involving Internet facing traffic.

Continue reading Citrix NetScaler… The basics continued, part seven. Split Tunneling!

Presenting… The Remote Display Analyzer!

Average time to read: 5 minutes

Back in November 2015, at the E2EVC conference in Lisbon Bram and Barry first introduced us to their latest and greatest community contribution, the Remote Display Analyzer. And I can tell you, it was very well received *understatement* It seemed that this was something a lot of IT folks were waiting for. Today you have the opportunity to try it out for your self. Read on to learn why this tool will make all the difference when working with and/or troubleshooting the different HDX codes available from Citrix today. Keep an eye on basvankaam.com for any future updates.

Continue reading Presenting… The Remote Display Analyzer!

Citrix Machine Creation Services… What to consider!

Average time to read: 11 minutes

Since this will officially be my first blog post as a Citrix CTP, I would like to start by thanking everybody for your support during the last couple of years and of course for all the congratulations and well wishes I have received since the official announcement last week. It has been a truly wonderful experience! Having said that, let’s get back on topic. This is not going to be a MCS vs. PVS kind of blog post; there are plenty of good ones out there already, instead I will assume that you already choose MCS over PVS. However, while the choice has been made you still have some doubts as to weather MCS is up to the task at hand. Throughout this post I will summarize some things to think about and questions to ask when and before implementing Citrix MCS.

Continue reading Citrix Machine Creation Services… What to consider!

2015! My year in review, and what a year it has been!

Average time to read: 4 minutes

2015, where do I start? It was an amazing year to say the least, personally as well as professionally. For one, it was another year full of events and get togethers, which, as always I enjoyed very much. In fact, 2015 marked the year of my first ever Citrix Synergy, and what a ride it turned out to be. I’ll definitely be back for seconds! Looking back from 2013 up till now I can only say that I am privileged to have met so many great and fun community folks over the last couple of years and hopefully it doesn’t stop here.

Continue reading 2015! My year in review, and what a year it has been!

An in-depth look at the Citrix FMA Server VDA… The one that (almost) got away!

Average time to read: 5 minutes

Ever since the introduction of XenDesktop 7, where the FMA took over and XenApp was integrated, a lot has been written with regards to its components, services, agents and so on. What surprises me though, is that the Server VDA is (almost) never mentioned, while this is, or at least was a brand new component. Never before was it optional to install a (relatively) lightweight agent onto a XenApp server, it was basically all or nothing.

Continue reading An in-depth look at the Citrix FMA Server VDA… The one that (almost) got away!

The ultimate Citrix printing internals cheat sheet! BIG Takeaway list included!

Average time to read: 21 minutes

In this article (part two) I’d like to focus on the Citrix printing pathways, how they differ and when one or the other will, or can be used. I’ll also highlight the universal print driver, server and printer together with a whole bunch of CTX defaults, best practices including some of the most common troubleshooting tools and a BIG list of takeaways. However, knowing what happens after a user hits print and how traffic flows throughout our infrastructure is probably the best place to start. I have also included a BIG list of takeaways, which is available as a separate download as well.

Continue reading The ultimate Citrix printing internals cheat sheet! BIG Takeaway list included!

Citrix NetScaler… The basics continued, part six. Content Switching!

Average time to read: 6 minutesIf you have been following this series up till now, meaning you actually have read part one through five, then Content Switching should be a relatively easy concept to grasp. If you understand what a vServer is, how a service and server object are bound to each other and that we use monitors to constantly check if all is up and running then you are basically good to go. All we need now is a content switch vServer and a basic load balance setup and take it from there.

Continue reading Citrix NetScaler… The basics continued, part six. Content Switching!

Verified by MonsterInsights